Onda A31

Computer not recognizing USB when Onda A31 is connected to PC using a USB cable? Onda A31 phone not showing up on PC? It might be a driver problem, or your computer might be missing the required Onda A31 USB Drivers. To fix the issue, download Onda A31 USB Driver and install them on your computer.

Most computers don’t have proper Google Android USB Drivers installed, so it is essential to download Onda USB Drivers and install them on your computer to properly connect Onda A31 to a Computer or Laptop using a USB cable. Here on this page, we have shared the official Onda A31 USB driver for Windows 10, Windows 7, Windows 8.1, and Windows 8.

Apart from the official USB Driver for Onda A31, we have also shared ADB interface drivers and Fastboot drivers for Onda A31.

The Onda A31 Android USB Driver allows you to connect your phone as an MTP USB device (Media Transfer Protocol) to a computer and laptop so that you can transfer images, videos, documents, and other files to and from phone to computer.

The Onda A31 ADB driver and Fastboot driver allows you to pass ADB commands and fastboot commands to perform specific operations on your phone right from your computer.

Download Onda A31 USB Driver

The Onda Phone drivers shared here can be used to flash stock firmware, stock recovery, TWRP recovery, CWM recovery, unlock the bootloader, etc. It can also be used for general purposes like transferring data, media, documents, and other files from phone to computer and vice versa.

Onda A31 Driver for Flashing Firmware

Download Now

Onda A31 USB Driver for normal connecting to PC

Download Now

The Onda A31 Fastboot and ADB drivers can be downloaded below.

Onda A31 ADB and Fastboot Drivers

Download Now

[!] Note: If you face Driver Signature Error while installing the USB Driver, then watch this video to fix the problem.

Also Download: Onda V819 3G USB Drivers

How to Install Onda A31 USB Drivers Manually

  1. Download the latest_usb_driver_windows.zip file on your computer and extract it on Desktop.Onda A31 Google Android USB Driver
  2. Open the Device Manager on your computer by searching device manager from Windows Start Menu.Device Manager Windows Start Menu Search
  3. Now click on your Computer name in the Device Manager window.Device Manager Computer Name
  4. Now click on Action and then select Add legacy hardware.Device Manager Add legacy hardware
  5. Add Hardware Wizard window should open, click on Next to continue.Add Hardware Wizard
  6. Now select Install the hardware that I manually select from a list (Advanced) option and click on Next.Onda A31 Install Driver Manually
  7. Select Show All Devices from the list and click on Next.Show all Hardware Devices
  8. On the next screen, click on Have Disk… to open the Install From Disk window.Add Hardware Have Disk
  9. Click on Browse… and navigate to the folder where you have extracted the drivers in Step #1.Install From Disk - Browse
  10. Now select android_winusb.inf file and click on Open and then on OK.Onda A31 USB Driver android_winusb.inf
  11. Select the Android ADB Interface driver from the list and click on Next.Onda A31 Android ADB Interface Driver
  12. Confirm the Hardware driver to install and click on Next to begin the installation process.Install Onda A31 Android ADB Interface Driver
  13. Once installed, click on Finish.Onda A31 Android ADB Interface Driver Installed
  14. Follow Steps #3 to #13 again and install the Android Bootloader Interface driver and Android Composite ADB Interface driver.Install Onda A31 Android Bootloader Interface Driver
  15. Once all the listed drivers are installed, restart your computer.

How to Install Onda A31 ADB and Fastboot Drivers

  1. Download and extract 15 seconds ADB installer on your computer.15 Seconds ADB Installer
  2. Now right click on the adb driver installer setup file (adb-setup.exe) and click on Run as administrator.Run ADB and Fastboot Installer as administrator
  3. Now a command prompt window with a blue background and white text should open.Onda A31 ADB and Fastboot installer
  4. It should ask whether you want to install ADB and Fastboot? Press the Y key on your keyboard and hit Enter.Install Onda A31 ADB and Fastboot Driver
  5. Now, it should ask whether you want to install ADB system-wide? Again press the Y key and hit Enter.Install Onda A31 ADB system-wide
  6. Now, the ADB driver and Fastboot driver installation process should begin.
  7. When finished, it should ask whether you want to install device drivers? Press the Y key and hit Enter.install Onda A31 drivers
  8. Now the “Device Driver Installation Wizard” window should open.
  9. Click on Next to continue installing the Google USB Drivers (WinUSB).Install Onda A31 Google Android USB Driver WinUSB
  10. Once installed, click on Finish and reboot your computer.Onda A31 Google USB Driver installation complete

Important Notes:

[*] Driver Signature Error: If you got Driver Signature Error While installing the Driver then See this Video to fix this problem.

[*] Broken link: Report here.

[*] Have we missed any device model? Let us know by contacting us via Contact Us page.

The post Onda A31 appeared first on Android USB Drivers.

Multilaser M9S ML-JI09

Windows computer not recognizing Multilaser M9S ML-JI09 Phone? Or Multilaser M9S ML-JI09 android phone won’t connect to the PC? It can be the result of missing Multilaser M9S ML-JI09 USB drivers or bad or corrupted drivers. To fix Multilaser M9S ML-JI09 Android phone not showing up on PC, download the Multilaser M9S ML-JI09 USB driver and install it on your computer.

Multilaser USB drivers are essential to efficiently connect Multilaser M9S ML-JI09 to Computer and Laptop using a USB cable. On this page, we have managed to share the official Multilaser M9S ML-JI09 USB driver for Windows 10, Windows 7, Windows 8.1, and Windows 8. Apart from the official USB Driver for Multilaser M9S ML-JI09, we have also shared Multilaser M9S ML-JI09 ADB interface drivers and Fastboot drivers.

The Multilaser M9S ML-JI09 Android USB driver allows you to connect your phone as an MTP USB device (Media Transfer Protocol) to the computer so that you can transfer images, videos, documents, and other files between the phone and computer. Thus it will fix the android file transfer not working issue.

The Multilaser M9S ML-JI09 ADB driver and Fastboot driver allow you to pass ADB and Fastboot commands from the PC to perform certain operations on your phone.

Download Multilaser M9S ML-JI09 USB Driver

The Multilaser mobile drivers offered here can be used to flash stock firmware, stock recovery, TWRP recovery, CWM Recovery, Unlocking Bootloader, etc. It can also be used for general purposes like transferring media and files to and from mobile to PC.

Multilaser M9S ML-JI09 Driver for Flashing Firmware

Download Now

Multilaser M9S ML-JI09 USB Driver for normal connecting to PC

Download Now

The Multilaser M9S ML-JI09 Fastboot and ADB drivers can be downloaded below.

Multilaser M9S ML-JI09 ADB and Fastboot Drivers

Download Now

[!] Note: If you face Driver Signature Error while installing the USB Driver, then watch this video to fix the problem.

Also Download: Multilaser M7 3G Plus ML-WI0A USB Drivers

How to Install Multilaser M9S ML-JI09 USB Drivers Manually

  1. Download and extract the latest Android USB Driver (latest_usb_driver_windows.zip) file to Desktop on your computer.Multilaser M9S ML-JI09 Google Android USB Driver
  2. Now open the Device Manager on your computer by right-clicking Windows Start Button and selecting Device Manager.Windows Start Button Device Manager
  3. Now click on your Computer name in the Device Manager window.Device Manager Computer Name
  4. Now click on Action and then click on Add legacy hardware.Device Manager Add legacy hardware
  5. Now Add Hardware Wizard window should open. Click on Next to continue.Add Hardware Wizard
  6. Select Install the hardware that I manually select from a list (Advanced) option and click on Next.Multilaser M9S ML-JI09 Install Driver Manually
  7. Select Show All Devices from the list and click on Next.Show all Hardware Devices
  8. In the next screen, click on Have Disk… to open the Install From Disk window.Add Hardware Have Disk
  9. In the Install From Disk window, click on Browse… and navigate to the folder where you have extracted the drivers in Step #1.Install From Disk - Browse
  10. Now select android_winusb.inf driver file and click on Open and then on OK.Multilaser M9S ML-JI09 USB Driver android_winusb.inf
  11. Now select the Android ADB Interface driver from the list and click on Next.Multilaser M9S ML-JI09 Android ADB Interface Driver
  12. Confirm the Hardware driver to install and click on Next to begin the installation process.Install Multilaser M9S ML-JI09 Android ADB Interface Driver
  13. Once installed, click on Finish.Multilaser M9S ML-JI09 Android ADB Interface Driver Installed
  14. Follow Steps #3 to #13 again and install the Android Bootloader Interface driver and Android Composite ADB Interface driver.Install Multilaser M9S ML-JI09 Android Bootloader Interface Driver
  15. Once all the listed drivers are installed, reboot your computer.

How to Install Multilaser M9S ML-JI09 ADB and Fastboot Drivers

  1. Download and extract the 15 Seconds ADB installer zip file on your computer. Once extracted, you’ll find the ADB driver installer setup file.15 Seconds ADB Installer
  2. Right-click on the ADB installer setup file and select Run as administrator.Run ADB and Fastboot Installer as administrator
  3. Now 15 seconds ADB driver installer command prompt window should open on your computer.Multilaser M9S ML-JI09 ADB and Fastboot installer
  4. It should ask whether you want to install the ADB driver and Fastboot driver. Press the Y key and then press Enter.Install Multilaser M9S ML-JI09 ADB and Fastboot Driver
  5. Now, it should ask whether you want to install the ADB driver system-wide. Press the Y key again and hit Enter.Install Multilaser M9S ML-JI09 ADB system-wide
  6. Now, the ADB and Fastboot driver installation process should begin.
  7. When the ADB driver installation is finished, it will ask whether you want to install device drivers. Press the Y key and then press Enter.install Multilaser M9S ML-JI09 drivers
  8. Now the “Device Driver Installation Wizard” window should pop-up.
  9. Click on Next to begin installing Google USB Drivers (WinUSB).Install Multilaser M9S ML-JI09 Google Android USB Driver WinUSB
  10. Once the installation process is completed, click on Finish and restart your computer.Multilaser M9S ML-JI09 Google USB Driver installation complete

Important Notes:

[*] Driver Signature Error: If you got Driver Signature Error While installing the Driver then See this Video to fix this problem.

[*] Broken link: Report here.

[*] Have we missed any device model? Let us know by contacting us via Contact Us page.

The post Multilaser M9S ML-JI09 appeared first on Android USB Drivers.

Nokia Mclaren Prime

Nokia Mclaren Prime phone charging but not connecting to PC? Nokia Mclaren Prime phone not showing up on PC? Maybe it is because of missing Nokia Mclaren Prime USB drivers or bad or corrupt drivers. To fix the Nokia Mclaren Prime phone won’t connect to a computer problem, download Nokia Mclaren Prime USB Driver and install it on your computer.

Nokia USB Drivers are essential to connect Nokia Mclaren Prime to a computer or laptop via USB cable. If you’re looking for Nokia Mclaren Prime USB Driver for Windows 10, Windows 7, Windows 8.1, and Windows 8, then you can download them from the downloads section below. On this page, we have shared the official USB Driver for Nokia Mclaren Prime along with ADB interface drivers and Fastboot drivers.

The Nokia Mclaren Prime Android USB driver helps connect your phone as an MTP USB device (Media Transfer Protocol) and transfer images, videos, documents, and other files to and from phone to computer or laptop. If you’re facing an android file transfer not working issue, it is recommended to install Nokia Mclaren Prime drivers to fix the problem.

On the other hand, the Nokia Mclaren Prime ADB driver and Fastboot driver allows you to pass ADB commands and Fastboot commands to perform certain operations on your phone right from your computer.

Download Nokia Mclaren Prime USB Driver

The Nokia mobile drivers offered here can be used to flash stock firmware, stock recovery, TWRP recovery, CWM Recovery, Unlocking Bootloader, etc. They can also be used for general purposes like transferring media, documents, and other data to and from mobile phone to computer.

Nokia Mclaren Prime Driver for Flashing Firmware

Download Now

Nokia Mclaren Prime USB Driver for normal connecting to PC

Download Now

The Nokia Mclaren Prime Fastboot and ADB drivers can be downloaded below.

Nokia Mclaren Prime ADB and Fastboot Drivers

Download Now

[!] Note: If you face Driver Signature Error while installing the USB Driver, then watch this video to fix the problem.

Also Download: Nokia Edge Pro Max USB Drivers

How to Install Nokia Mclaren Prime Qualcomm USB Drivers

  1. Download and extract Qualcomm USB Driver (qualcomm-driver.zip) package to Desktop on your computer.
  2. After extracting, you’ll find the Qualcomm Driver setup file (Qualcomm_USB_Driver_V1.0.exe).Nokia Mclaren Prime Qualcomm Drivers
  3. Right-click on the Qualcomm USB Drivers setup file and select Run as administrator.Run Nokia Mclaren Prime Qualcomm USB Driver Installer
  4. Now Qualcomm USB Drivers for Windows – InstallShield Wizard window should open. Select ETHERNET-DHCP is used to get the IPAddress option and click on Next.Nokia Mclaren Prime Qualcomm USB Drivers for Windows setup
  5. Click on Next again to proceed with the installation process.Nokia Mclaren Prime Qualcomm Android Drivers setup
  6. Select I accept the terms in the license agreement and click on Next.Qualcomm Drivers License Agreement
  7. Now, click on Install to begin the Qualcomm HS-USB Driver installation.Install Nokia Mclaren Prime Qualcomm USB Drivers
  8. Click on Install if a Windows Security window asking, “Would you like to install this device software?” pop-up.Qualcomm Drivers Windows Security window
  9. Once the drivers are installed, click on Finish to close the installation wizard window.Nokia Mclaren Prime Qualcomm USB Driver Installed
  10. Finally, reboot your computer.

How to Install Nokia Mclaren Prime USB Drivers Manually

  1. Download and extract the latest_usb_driver_windows.zip package on your computer.Nokia Mclaren Prime Google Android USB Driver
  2. Open the Device Manager on your computer by right-clicking Windows Start Button and selecting Device Manager.Windows Start Button Device Manager
  3. Once the Device Manager window opens, click on your Computer name.Device Manager Computer Name
  4. Now click on Action and then on Add legacy hardware.Device Manager Add legacy hardware
  5. Now Add Hardware Wizard window should pop-up. Click on Next to continue.Add Hardware Wizard
  6. In the next screen, select Install the hardware that I manually select from a list (Advanced) option and click on Next.Nokia Mclaren Prime Install Driver Manually
  7. Now select Show All Devices and click on Next.Show all Hardware Devices
  8. Now click on Have Disk… to open the Install From Disk window.Add Hardware Have Disk
  9. Click on Browse… and navigate to the folder where you have extracted the drivers in Step #1.Install From Disk - Browse
  10. Now select android_winusb.inf file and click on Open and then on OK.Nokia Mclaren Prime USB Driver android_winusb.inf
  11. Select the Android ADB Interface driver from the list and click on Next.Nokia Mclaren Prime Android ADB Interface Driver
  12. Confirm the Hardware driver to install and click on Next to begin the installation process.Install Nokia Mclaren Prime Android ADB Interface Driver
  13. Once installed, click on Finish.Nokia Mclaren Prime Android ADB Interface Driver Installed
  14. Follow Steps #3 to #13 again and install the Android Bootloader Interface driver and Android Composite ADB Interface driver.Install Nokia Mclaren Prime Android Bootloader Interface Driver
  15. Once all the listed drivers are installed, reboot your computer.

How to Install Nokia Mclaren Prime ADB and Fastboot Drivers

  1. Download and extract 15 seconds ADB installer on your computer to obtain the adb-setup.exe file.15 Seconds ADB Installer
  2. Now right click on the adb driver installer setup file and click on Run as administrator.Run ADB and Fastboot Installer as administrator
  3. Now you’ll see a command prompt window with a blue background and white text.Nokia Mclaren Prime ADB and Fastboot installer
  4. It should say, Do you want to install ADB and Fastboot? Press the Y key on your keyboard and hit Enter.Install Nokia Mclaren Prime ADB and Fastboot Driver
  5. Now, it should ask whether you want to install ADB system-wide? Again press the Y key and hit Enter.Install Nokia Mclaren Prime ADB system-wide
  6. Now, the ADB and Fastboot installation process should begin.
  7. When finished, it should say, Do you want to install device drivers? Press the Y key and hit Enter.install Nokia Mclaren Prime drivers
  8. Now the “Device Driver Installation Wizard” window should open.
  9. Click on Next to continue installing the Google USB Drivers (WinUSB).Install Nokia Mclaren Prime Google Android USB Driver WinUSB
  10. Once installed, click on Finish and restart your computer.Nokia Mclaren Prime Google USB Driver installation complete

Important Notes:

[*] Driver Signature Error: If you got Driver Signature Error While installing the Driver then See this Video to fix this problem.

[*] Broken link: Report here.

[*] Have we missed any device model? Let us know by contacting us via Contact Us page.

The post Nokia Mclaren Prime appeared first on Android USB Drivers.